
M1
MegaRobotics
A wheel-legged quadruped that rolls fast on the flat and walks where wheels give up.

The M1 with navigation, mapping, follow mode and two-way voice built in.
The M1 Pro is the M1 ready for autonomous work out of the box. Navigation and mapping come standard, so it can run planned inspection and patrol routes on its own. It follows a person or vehicle using UWB, LiDAR and vision, which makes it useful for carrying tools and material around a site, and it has ultrasonic sensors for close-range obstacles and a voice intercom with broadcast for talking to people on the spot. The platform is the same as the M1: twelve joint motors and four wheel hub motors, 41 kg, 30 kg payload while walking, 6 m/s, IP67, two 3D LiDARs, a depth camera and RTK, and up to 5 hours unloaded on two hot-swap batteries. Storage grows to 256 GB plus a 512 GB card. MegaRobotics supplies, integrates and services the M1 Pro in the DACH region, built by an OEM manufacturing partner. CE conformity is in preparation. The M1 Pro has no explosion protection and is meant for areas outside classified Ex zones. Product images are renderings and may differ from the delivered unit.
| Dimensions standing (L × W × H) | 930 × 480 × 595 mm |
| Dimensions lying down (L × W × H) | 930 × 630 × 210 mm |
| Weight incl. batteries | 41 kg |
| Drive | 12 joint motors + 4 wheel hub motors |
| Peak joint torque | 180 N·m |
| Payload while walking | 30 kg |
| Speed | 6 m/s, peaks of 8 m/s |
| Stairs | Steps up to 25 cm, continuous |
| Max. obstacle height | 80 cm |
| Max. slope | 45° |
| Battery | 2 × 54 V / 9.35 Ah (1,010 Wh in total), hot-swap |
| Charging time | Under 2 h |
| Range and endurance | 29 km / 5 h unloaded, 18 km / 3.5 h at full load (measured at 1 m/s) |
| Ingress protection | IP67 |
| Operating temperature | −20 to +55 °C (−40 to +80 °C with optional wide-temperature battery) |
| Explosion protection | None |
| Main computer | 8-core CPU, 100 TOPS |
| Storage | 256 GB + 512 GB TF card |
| Standard sensors | 2 × 3D LiDAR (front and rear), depth camera, IMU, RTK, ultrasonic, 2 × 8 MP wide-angle camera, 4 fill lights |
| Navigation and mapping | Standard |
| Follow mode | UWB, LiDAR and vision |
| Voice | Intercom and broadcast |
| Obstacle avoidance | Supported |
| Motion modes | Crawl for narrow passages, stair climbing, high platforms, rodent barriers |
| Interfaces | 2 × Gigabit Ethernet, 2 × USB 3.0, RS232, RS485, 2 × SBUS, PPS |
| Payload power | 12 / 24 / 48 V, switchable via SDK |
| Wireless | Wi-Fi, Bluetooth |
| Software | Open SDK (C++, Ubuntu 22.04), ROS 2 Humble with Nav2, URDF models, simulator; scope confirmed per quotation |
| Scope of supply | Charger, charging dock, remote control, transport case |
| Options | Charging station for autonomous recharging, point-foot kit, wide-temperature battery, Jetson Orin NX 16 GB compute module |
| CE conformity | In preparation |
| Values as of | 11/2026; subject to change |

MegaRobotics
A wheel-legged quadruped that rolls fast on the flat and walks where wheels give up.

MegaRobotics
720° surround perception and 128 TOPS of onboard compute on the M1 platform.

MegaRobotics
The heavy-duty walking robot for 50 kg payloads, IP67 and long outdoor shifts.

MegaRobotics
Heavy-duty wheel-legged platform: 50 kg payload, up to 6 hours, 40 cm obstacles.

LimX Dynamics
Limitless Art, Fluid Motion

LimX Dynamics
Multi-Form Embodied Robot with Cutting-edge Algorithms

LimX Dynamics
Full-Size General-Purpose Humanoid Robot - Cross the Limits with Oli

LimX Dynamics
The First Multi-Modal Biped Robot — The Gateway to Humanoid RL Research